INTERVOLT DCC PRO DUAL BATTERY KIT - INTERVOLT INTERVOLT DCC PRO DUAL BATTERY KIT - INTERVOLT AE4A INTERVOLT DCC PRO DUAL BATTERY KIT - INTERVOLT. The Intervolt DCC Pro, DC-DC Battery Charger is built TOUGH for our tough Australian conditions. Unlike many imported products, it is designed to maintain output in the harshest of environments under the highest ambient temperatures. It is designed for use in 4X4's, RV's, buses, caravans, campers Boats or anything with a 12V electrical system. A lot of the other DC DC chargers on the market are not up to the task of an under bonnet installation, with an IP67 rating the unit is Dust proof and Waterproof, that coupled with and operating temp range of -20°C to +85°C under bonnet mounting issues are a thing of the past. The DCC Pro is a standalone power conversion device. It will manage a variety of different battery types according to their specific charging requirements. No modification to the vehicle’s original wiring is required this ensures the manufacturer’s electrical system is not compromised in any way. The DCC Pro is a highly innovative product with many unique features. It has the flexibility to adapt to almost any vehicle, old or new, simple or complex with or without an ECU controlled electrical system and even allows the operator monitor the charging status from the comfort of the cabin!   The Nitty Gritty; Input Voltage –• Main: 9 – 16 VDC• Solar: 18 – 28 VOC (open circuit Voltage – no load) Solar Power – Unrestricted (system limited to 25 Amps) Continuous Rating – 25 Amps@50°C (de-rate from 50°C to 85°C) Current Draw – Charging Device:In stand by: Including LED indicator <10mAAt full load: Up to 35 Amps Current Draw – Remote Display:With backlight off: 10mA maxWith backlight on: 45mA max Output Voltage – (Voltage values subject to tolerance ± 0.1V) • Standard Lead Acid: Boost/CC: 14.5 VDC, Absorption/CV: 14.4 VDC, Float/CV: 13.4 VDC • Absorbed Glass Mat: Boost/CC: 14.7 VDC, Absorption/CV: 14.6 VDC, Float/CV: 13.6 VDC • Gelified Electrolyte: Boost/CC: 14.3 VDC, Absorption/CV: 14.2 VDC, Float/CV: 13.5 VDC • Lead Calcium: Boost/CC: 14.9 VDC, Absorption/CV: 14.8 VDC, Float/CV: 13.8 VDC • LiFePO4 BMS: Boost/CC: 14.6 VDC, Absorption/CV: – , Float/CV: 14.4 VDC Electrical Protection –• Over temperature disconnect – auto re-connect• Under Voltage shutdown – auto re-start• High Voltage disconnect – auto re-connect• Reverse polarity protection on all terminals Environmental Protection –• Charging Device: IP67 (internal components only)• Remote Display: IP40 (not dust or water resistant) Operating Temperature – -20°C to +85°C Operating Humidity – Up to 100% (non-condensing) Charging Device Materials –• Heatsink: E-Coated ADC-3 die cast aluminium• Blue Plastics: 10% glass reinforced PC/ABS alloy• Black Plastics: 15% glass reinforced PBT• Transparent Plastics: Temperature resistant PMMA Remote Display Materials – • Dark Grey Plastics: Temperature resistant PC/ABS alloy• Transparent Plastics: Temperature resistant PMMA Terminal Material – Tin plated brass Terminal Fasteners – 304 stainless steel Conformity – AS/NZS CISPR 11:2004 for EMC Dimensions –• Charging Device: 112 x 112 x 75mm (including terminal cover)• Remote Display: 60 x 36 x 59mm (including mounting bracket) Weight –• Charging Device: 690 grams• Remote Display: 55 grams

INTERVOLT DCC PRO DUAL BATTERY KIT - INTERVOLT

Code: VOL-DCC1225ACKRP
$410.00
In Stock
  • THE PRICE YOU SEE IS THE PRICE YOU PAY

  • TOP QUALITY AT A GREAT RATE

  • FREE SHIPPING AUSTRALIA WIDE

INTERVOLT DCC PRO DUAL BATTERY KIT - INTERVOLT.


The Intervolt DCC Pro, DC-DC Battery Charger is built TOUGH for our tough Australian conditions. Unlike many imported products, it is designed to maintain output in the harshest of environments under the highest ambient temperatures. It is designed for use in 4X4's, RV's, buses, caravans, campers Boats or anything with a 12V electrical system.


A lot of the other DC DC chargers on the market are not up to the task of an under bonnet installation, with an IP67 rating the unit is Dust proof and Waterproof, that coupled with and operating temp range of -20°C to +85°C under bonnet mounting issues are a thing of the past.


The DCC Pro is a standalone power conversion device. It will manage a variety of different battery types according to their specific charging requirements. No modification to the vehicle’s original wiring is required this ensures the manufacturer’s electrical system is not compromised in any way.

The DCC Pro is a highly innovative product with many unique features. It has the flexibility to adapt to almost any vehicle, old or new, simple or complex with or without an ECU controlled electrical system and even allows the operator monitor the charging status from the comfort of the cabin!

 

The Nitty Gritty;

Input Voltage –
 Main: 9 – 16 VDC
 Solar: 18 – 28 VOC (open circuit Voltage – no load)

Solar Power  Unrestricted (system limited to 25 Amps)

Continuous Rating  25 Amps@50°C (de-rate from 50°C to 85°C)

Current Draw  Charging Device:
In stand by: Including LED indicator <10mA
At full load: Up to 35 Amps

Current Draw – Remote Display:
With backlight off: 10mA max
With backlight on: 45mA max

Output Voltage – (Voltage values subject to tolerance ± 0.1V)

  •  Standard Lead Acid:
  • Boost/CC: 14.5 VDC, Absorption/CV: 14.4 VDC, Float/CV: 13.4 VDC
  •  Absorbed Glass Mat:
  • Boost/CC: 14.7 VDC, Absorption/CV: 14.6 VDC, Float/CV: 13.6 VDC
  •  Gelified Electrolyte:
  • Boost/CC: 14.3 VDC, Absorption/CV: 14.2 VDC, Float/CV: 13.5 VDC
  •  Lead Calcium:
  • Boost/CC: 14.9 VDC, Absorption/CV: 14.8 VDC, Float/CV: 13.8 VDC
  •  LiFePO4 BMS:
  • Boost/CC: 14.6 VDC, Absorption/CV: – , Float/CV: 14.4 VDC

Electrical Protection 
 Over temperature disconnect – auto re-connect
 Under Voltage shutdown – auto re-start
 High Voltage disconnect – auto re-connect
 Reverse polarity protection on all terminals

Environmental Protection 
 Charging Device: IP67 (internal components only)
 Remote Display: IP40 (not dust or water resistant)

Operating Temperature – -20°C to +85°C

Operating Humidity – Up to 100% (non-condensing)

Charging Device Materials 
 Heatsink: E-Coated ADC-3 die cast aluminium
 Blue Plastics: 10% glass reinforced PC/ABS alloy
 Black Plastics: 15% glass reinforced PBT
 Transparent Plastics: Temperature resistant PMMA

Remote Display Materials  
 Dark Grey Plastics: Temperature resistant PC/ABS alloy
 Transparent Plastics: Temperature resistant PMMA

Terminal Material – Tin plated brass

Terminal Fasteners – 304 stainless steel

Conformity – AS/NZS CISPR 11:2004 for EMC

Dimensions 
 Charging Device: 112 x 112 x 75mm (including terminal cover)
 Remote Display: 60 x 36 x 59mm (including mounting bracket)

Weight 
 Charging Device: 690 grams
 Remote Display: 55 grams

      INTERVOLT DCC PRO DUAL BATTERY KIT - INTERVOLT.


      The Intervolt DCC Pro, DC-DC Battery Charger is built TOUGH for our tough Australian conditions. Unlike many imported products, it is designed to maintain output in the harshest of environments under the highest ambient temperatures. It is designed for use in 4X4's, RV's, buses, caravans, campers Boats or anything with a 12V electrical system.

      A lot of the other DC DC chargers on the market are not up to the task of an under bonnet installation, with an IP67 rating the unit is Dust proof and Waterproof, that coupled with and operating temp range of -20°C to +85°C under bonnet mounting issues are a thing of the past.

      The DCC Pro is a standalone power conversion device. It will manage a variety of different battery types according to their specific charging requirements. No modification to the vehicle’s original wiring is required this ensures the manufacturer’s electrical system is not compromised in any way.
      The DCC Pro is a highly innovative product with many unique features. It has the flexibility to adapt to almost any vehicle, old or new, simple or complex with or without an ECU controlled electrical system and even allows the operator monitor the charging status from the comfort of the cabin!

       

      The Nitty Gritty;

      Input Voltage –
       Main: 9 – 16 VDC
       Solar: 18 – 28 VOC (open circuit Voltage – no load)

      Solar Power  Unrestricted (system limited to 25 Amps)

      Continuous Rating  25 Amps@50°C (de-rate from 50°C to 85°C)

      Current Draw  Charging Device:
      In stand by: Including LED indicator <10mA
      At full load: Up to 35 Amps

      Current Draw – Remote Display:
      With backlight off: 10mA max
      With backlight on: 45mA max

      Output Voltage – (Voltage values subject to tolerance ± 0.1V)

      •  Standard Lead Acid:
      • Boost/CC: 14.5 VDC, Absorption/CV: 14.4 VDC, Float/CV: 13.4 VDC
      •  Absorbed Glass Mat:
      • Boost/CC: 14.7 VDC, Absorption/CV: 14.6 VDC, Float/CV: 13.6 VDC
      •  Gelified Electrolyte:
      • Boost/CC: 14.3 VDC, Absorption/CV: 14.2 VDC, Float/CV: 13.5 VDC
      •  Lead Calcium:
      • Boost/CC: 14.9 VDC, Absorption/CV: 14.8 VDC, Float/CV: 13.8 VDC
      •  LiFePO4 BMS:
      • Boost/CC: 14.6 VDC, Absorption/CV: – , Float/CV: 14.4 VDC

      Electrical Protection 
       Over temperature disconnect – auto re-connect
       Under Voltage shutdown – auto re-start
       High Voltage disconnect – auto re-connect
       Reverse polarity protection on all terminals

      Environmental Protection 
       Charging Device: IP67 (internal components only)
       Remote Display: IP40 (not dust or water resistant)

      Operating Temperature – -20°C to +85°C

      Operating Humidity – Up to 100% (non-condensing)

      Charging Device Materials 
       Heatsink: E-Coated ADC-3 die cast aluminium
       Blue Plastics: 10% glass reinforced PC/ABS alloy
       Black Plastics: 15% glass reinforced PBT
       Transparent Plastics: Temperature resistant PMMA

      Remote Display Materials  
       Dark Grey Plastics: Temperature resistant PC/ABS alloy
       Transparent Plastics: Temperature resistant PMMA

      Terminal Material – Tin plated brass

      Terminal Fasteners – 304 stainless steel

      Conformity – AS/NZS CISPR 11:2004 for EMC

      Dimensions 
       Charging Device: 112 x 112 x 75mm (including terminal cover)
       Remote Display: 60 x 36 x 59mm (including mounting bracket)

      Weight 
       Charging Device: 690 grams
       Remote Display: 55 grams