INTERVOLT DCC PRO DUAL BATTERY KIT - INTERVOLT.
The Nitty Gritty;
Input Voltage –
• Main: 9 – 16 VDC
• Solar: 18 – 28 VOC (open circuit Voltage – no load)
Solar Power – Unrestricted (system limited to 25 Amps)
Continuous Rating – 25 Amps@50°C (de-rate from 50°C to 85°C)
Current Draw – Charging Device:
In stand by: Including LED indicator <10mA
At full load: Up to 35 Amps
Current Draw – Remote Display:
With backlight off: 10mA max
With backlight on: 45mA max
Output Voltage – (Voltage values subject to tolerance ± 0.1V)
- • Standard Lead Acid:
- Boost/CC: 14.5 VDC, Absorption/CV: 14.4 VDC, Float/CV: 13.4 VDC
- • Absorbed Glass Mat:
- Boost/CC: 14.7 VDC, Absorption/CV: 14.6 VDC, Float/CV: 13.6 VDC
- • Gelified Electrolyte:
- Boost/CC: 14.3 VDC, Absorption/CV: 14.2 VDC, Float/CV: 13.5 VDC
- • Lead Calcium:
- Boost/CC: 14.9 VDC, Absorption/CV: 14.8 VDC, Float/CV: 13.8 VDC
- • LiFePO4 BMS:
- Boost/CC: 14.6 VDC, Absorption/CV: – , Float/CV: 14.4 VDC
Electrical Protection –
• Over temperature disconnect – auto re-connect
• Under Voltage shutdown – auto re-start
• High Voltage disconnect – auto re-connect
• Reverse polarity protection on all terminals
Environmental Protection –
• Charging Device: IP67 (internal components only)
• Remote Display: IP40 (not dust or water resistant)
Operating Temperature – -20°C to +85°C
Operating Humidity – Up to 100% (non-condensing)
Charging Device Materials –
• Heatsink: E-Coated ADC-3 die cast aluminium
• Blue Plastics: 10% glass reinforced PC/ABS alloy
• Black Plastics: 15% glass reinforced PBT
• Transparent Plastics: Temperature resistant PMMA
Remote Display Materials –
• Dark Grey Plastics: Temperature resistant PC/ABS alloy
• Transparent Plastics: Temperature resistant PMMA
Terminal Material – Tin plated brass
Terminal Fasteners – 304 stainless steel
Conformity – AS/NZS CISPR 11:2004 for EMC
Dimensions –
• Charging Device: 112 x 112 x 75mm (including terminal cover)
• Remote Display: 60 x 36 x 59mm (including mounting bracket)
Weight –
• Charging Device: 690 grams
• Remote Display: 55 grams
INTERVOLT DCC PRO DUAL BATTERY KIT - INTERVOLT.
The Intervolt DCC Pro, DC-DC Battery Charger is built TOUGH for our tough Australian conditions. Unlike many imported products, it is designed to maintain output in the harshest of environments under the highest ambient temperatures. It is designed for use in 4X4's, RV's, buses, caravans, campers Boats or anything with a 12V electrical system.
A lot of the other DC DC chargers on the market are not up to the task of an under bonnet installation, with an IP67 rating the unit is Dust proof and Waterproof, that coupled with and operating temp range of -20°C to +85°C under bonnet mounting issues are a thing of the past.
The DCC Pro is a standalone power conversion device. It will manage a variety of different battery types according to their specific charging requirements. No modification to the vehicle’s original wiring is required this ensures the manufacturer’s electrical system is not compromised in any way.
The DCC Pro is a highly innovative product with many unique features. It has the flexibility to adapt to almost any vehicle, old or new, simple or complex with or without an ECU controlled electrical system and even allows the operator monitor the charging status from the comfort of the cabin!
The Nitty Gritty;
Input Voltage –
• Main: 9 – 16 VDC
• Solar: 18 – 28 VOC (open circuit Voltage – no load)
Solar Power – Unrestricted (system limited to 25 Amps)
Continuous Rating – 25 Amps@50°C (de-rate from 50°C to 85°C)
Current Draw – Charging Device:
In stand by: Including LED indicator <10mA
At full load: Up to 35 Amps
Current Draw – Remote Display:
With backlight off: 10mA max
With backlight on: 45mA max
Output Voltage – (Voltage values subject to tolerance ± 0.1V)
- • Standard Lead Acid:
- Boost/CC: 14.5 VDC, Absorption/CV: 14.4 VDC, Float/CV: 13.4 VDC
- • Absorbed Glass Mat:
- Boost/CC: 14.7 VDC, Absorption/CV: 14.6 VDC, Float/CV: 13.6 VDC
- • Gelified Electrolyte:
- Boost/CC: 14.3 VDC, Absorption/CV: 14.2 VDC, Float/CV: 13.5 VDC
- • Lead Calcium:
- Boost/CC: 14.9 VDC, Absorption/CV: 14.8 VDC, Float/CV: 13.8 VDC
- • LiFePO4 BMS:
- Boost/CC: 14.6 VDC, Absorption/CV: – , Float/CV: 14.4 VDC
Electrical Protection –
• Over temperature disconnect – auto re-connect
• Under Voltage shutdown – auto re-start
• High Voltage disconnect – auto re-connect
• Reverse polarity protection on all terminals
Environmental Protection –
• Charging Device: IP67 (internal components only)
• Remote Display: IP40 (not dust or water resistant)
Operating Temperature – -20°C to +85°C
Operating Humidity – Up to 100% (non-condensing)
Charging Device Materials –
• Heatsink: E-Coated ADC-3 die cast aluminium
• Blue Plastics: 10% glass reinforced PC/ABS alloy
• Black Plastics: 15% glass reinforced PBT
• Transparent Plastics: Temperature resistant PMMA
Remote Display Materials –
• Dark Grey Plastics: Temperature resistant PC/ABS alloy
• Transparent Plastics: Temperature resistant PMMA
Terminal Material – Tin plated brass
Terminal Fasteners – 304 stainless steel
Conformity – AS/NZS CISPR 11:2004 for EMC
Dimensions –
• Charging Device: 112 x 112 x 75mm (including terminal cover)
• Remote Display: 60 x 36 x 59mm (including mounting bracket)
Weight –
• Charging Device: 690 grams
• Remote Display: 55 grams