15AMP, 12V DUAL BATTERY SOLAR CHARGE REGULATOR - KT SOLAR 15AMP, 12V DUAL BATTERY SOLAR CHARGE REGULATOR - KT SOLAR AE4A KT Solar 15 Amp Solar Controller The KT 15 Amp Solar Controller is designed to charge 2 x 12V Deep Cycle Batteries at the same time. Can be used on; -Lead Acid -LTO -Gel -AGM -LiFePO4 -Calcium Batteries This Solar Charge Controller prevents batteries from becoming overcharged. The unit provides an automatic repair feature for deeply drained conventional lead-acid or calcium battery. The PWM Solar Charge Controller features a digital LCD to display battery voltage, charging current, charging capacity, percentage present, battery type, ambient temperature and fault codes. Coloured LED’s show the operational status and each battery conditions. Recommended for use with Single Solar Panels up to 160W or 2 x 100W Solar Panels in a parallel. The KT Solar regulators are PWM which are the most common, they do not use moving parts like an MPPT controller, this makes them a hell of a lot tougher and more suitable for use on Vehicles, Caravans and Boats or being transported in a moving vehicle. When a battery voltage reaches the regulation set-point, the PWM Regulator reduces the charging current to avoid over heating and overcharging the battery, the result is a higher charging efficiency, rapid recharging, and a healthy battery at full capacity. Dimensions: Dimensions (Height): 100mm Dimensions (Length): 130mm Dimensions (Depth): 28mm Features: 12V Dual Battery Charging Solar Panel Max 160W or 2 x 100W Solar Panels configured in parallel LCD Information Screen LED Power & Charging Status Selection Modes for Battery 1 & Battery 2 (BT1 – BT2) Suits Gel, AGM, Wet, Calcium, LTO & LiFePO4 Batteries. Present Percentage of Available Charge Reverse Polarity Protection, Short Circuit & Over Voltage IP65 Rated (dustproof & splashproof) Surface or flush mount Warranty & Guarantees: 12 Month Warranty on Manufacture & Build

15AMP, 12V DUAL BATTERY SOLAR CHARGE REGULATOR - KT SOLAR

Code: KT70762
$179.00
In Stock
  • THE PRICE YOU SEE IS THE PRICE YOU PAY

  • TOP QUALITY AT A GREAT RATE

  • FREE SHIPPING AUSTRALIA WIDE

KT Solar 15 Amp Solar Controller


The KT 15 Amp Solar Controller is designed to charge 2 x 12V Deep Cycle Batteries at the same time. Can be used on;
-Lead Acid
-LTO
-Gel
-AGM
-LiFePO4
-Calcium Batteries

This Solar Charge Controller prevents batteries from becoming overcharged. The unit provides an automatic repair feature for deeply drained conventional lead-acid or calcium battery.

The PWM Solar Charge Controller features a digital LCD to display battery voltage, charging current, charging capacity, percentage present, battery type, ambient temperature and fault codes. Coloured LED’s show the operational status and each battery conditions.

Recommended for use with Single Solar Panels up to 160W or 2 x 100W Solar Panels in a parallel.

The KT Solar regulators are PWM which are the most common, they do not use moving parts like an MPPT controller, this makes them a hell of a lot tougher and more suitable for use on Vehicles, Caravans and Boats or being transported in a moving vehicle.
When a battery voltage reaches the regulation set-point, the PWM Regulator reduces the charging current to avoid over heating and overcharging the battery, the result is a higher charging efficiency, rapid recharging, and a healthy battery at full capacity.

Dimensions:

  • Dimensions (Height): 100mm
  • Dimensions (Length): 130mm
  • Dimensions (Depth): 28mm

Features:

  • 12V Dual Battery Charging
  • Solar Panel Max 160W or 2 x 100W Solar Panels configured in parallel
  • LCD Information Screen
  • LED Power & Charging Status
  • Selection Modes for Battery 1 & Battery 2 (BT1 – BT2)
  • Suits Gel, AGM, Wet, Calcium, LTO & LiFePO4 Batteries.
  • Present Percentage of Available Charge
  • Reverse Polarity Protection, Short Circuit & Over Voltage
  • IP65 Rated (dustproof & splashproof)
  • Surface or flush mount

Warranty & Guarantees:

  • 12 Month Warranty on Manufacture & Build

    KT Solar 15 Amp Solar Controller


    The KT 15 Amp Solar Controller is designed to charge 2 x 12V Deep Cycle Batteries at the same time. Can be used on; -Lead Acid -LTO -Gel -AGM -LiFePO4 -Calcium Batteries
    This Solar Charge Controller prevents batteries from becoming overcharged. The unit provides an automatic repair feature for deeply drained conventional lead-acid or calcium battery.
    The PWM Solar Charge Controller features a digital LCD to display battery voltage, charging current, charging capacity, percentage present, battery type, ambient temperature and fault codes. Coloured LED’s show the operational status and each battery conditions.
    Recommended for use with Single Solar Panels up to 160W or 2 x 100W Solar Panels in a parallel.
    The KT Solar regulators are PWM which are the most common, they do not use moving parts like an MPPT controller, this makes them a hell of a lot tougher and more suitable for use on Vehicles, Caravans and Boats or being transported in a moving vehicle. When a battery voltage reaches the regulation set-point, the PWM Regulator reduces the charging current to avoid over heating and overcharging the battery, the result is a higher charging efficiency, rapid recharging, and a healthy battery at full capacity.

    Dimensions:

    • Dimensions (Height): 100mm
    • Dimensions (Length): 130mm
    • Dimensions (Depth): 28mm

    Features:

    • 12V Dual Battery Charging
    • Solar Panel Max 160W or 2 x 100W Solar Panels configured in parallel
    • LCD Information Screen
    • LED Power & Charging Status
    • Selection Modes for Battery 1 & Battery 2 (BT1 – BT2)
    • Suits Gel, AGM, Wet, Calcium, LTO & LiFePO4 Batteries.
    • Present Percentage of Available Charge
    • Reverse Polarity Protection, Short Circuit & Over Voltage
    • IP65 Rated (dustproof & splashproof)
    • Surface or flush mount

    Warranty & Guarantees:

    • 12 Month Warranty on Manufacture & Build